|
Filters, Cleaning Solution and Accessories
Prefilter Screens
Carbon Filters HEPA
Media
Media Filters Cleaning
Solution Wall Mounting
Brackets
Aluminum Prefilter
Screens
Our prefilter
screens capture the larger particles before they get to the electronic filter
cell or HEPA media pad, keeping the high efficiency filters cleaner, longer.
Prefilters can be washed and re-used for years and do not need to be
replaced until either damaged or show signs of excessive wear from years of
cleaning. Please choose the correct size for your unit from the chart below:
|
Carbon
afterfilters are the logical addition to any air purification system,
combining odor control with particulate control. Carbon filters help
control the odors from cigarette smoke, printing processes and much
more. Carbon filters will generally last up to 6-12 months in a
residential unit and 1-3 months in a commercial application due to the
greater amount of odors to be removed. Replacement numbers and sizes for
every LakeAir model are listed below. |
 |
Filter For
Model |
Part Number |
Size |
Replacement Schedule |
Shipping Weight |
| Excel |
#499027 |
16"
x 6¼" x ½" |
Every
6-12 months |
1
lb. |
| Maxum |
#499005 |
16"
x 11½" x ½" |
Every
6-12 months |
1
lb. |
|
For Replacement Carbon Filters for the Lakeair Excel or Maxum
Call, Email,
or Contact Us.
|
LA-1400 &
LA-2000 |
#499072 |
16"
x 19½" x ½" |
Every
1-3 months |
2
lbs. |
|
Go
to LA-1400 and LA-2000 Units Page
|
| LAFC |
#499072 |
16"
x 19½" x ½" |
Every
1-3 months |
2
lbs. |
|
Go
to LAFC Units Page
|
| LAD-1814 |
#499072 |
16"
x 19½" x ½" |
Every
6-12 months |
2
lbs. |
| LAD-2214 |
#499073 |
16"
x 23" x ½" |
Every
6-12 months |
2
lbs. |
|
Go
to LAD In-duct Models Page
|
 |
HEPA LAFC
Media Pad
Our HEPA
LAFC model ceiling mounted air cleaner offers true air purification.
Keep your machine running smoothly and efficiently by replacing
the filter every 12 months or earlier depending on dust load. A
dirty filter will cause undue strain on the model HEPA LAFC blower
motors and will not clean your room air as effectively as a new filter. Filter
size: 20¼" x 16½" x 4".
True
HEPA efficiency - 99.97% at 0.3 micron particle size
#499081
Replacement HEPA Media Pad
Integrated
odor-controlling carbon afterfilter
#499072
Replacement Carbon Filter for LAFC
|
Media-1
Replacement Filters
Media-1
filters are the perfect inexpensive upgrade from ordinary fiberglass
filters. The slim design of the Media-1 unit allows installation in even
the tightest spots. Replace filter every 6-12 months depending on dust
load. Filter sizes: #20071 (Media1-1814) 16" x 20" x 4¼",
#20072 (Media1-2214) 16" x 25" x 4¼".
Perfect
intermediate step-up from fiberglass filters. 98% efficient on particles 6
microns and larger, 80-90% efficient on 4 micron size. Pre-built media
requires no installation - just slide it into the case! Replace every 6-12
months depending on dirt load |
 |
#20086
Replacement media for M-18; #20087 Replacement media for M-22;
#20071 Replacement media for M1-1814; #20072 Replacement media for M1-2214
 |
LA-99
Concentrated Cell Cleaning Solution
LA-99
is a one gallon concentrated cell cleaning solution which works
especially well on tough, greasy particulate soiled cells coated with
tobacco tar, nicotine, cooking grease in restaurants and similar hard to
remove contaminants. LA-99 should be diluted one part solution to 5 - 10
parts water. May be sprayed onto cells or soaked in solution. Cleans
tough dirt in less than 15 minutes. Read all directions carefully before
use.
One
gallon concentrate makes up to 10 gallons! Removes tough contaminants like cigarette tar and nicotine quickly and
easily. Useful for a variety of tough cleaning chores. |
|
The
LakeAir Wall mounting bracket is available for either the Excel or the
Maxum portable air cleaners. This accessory allows you to mount the unit
above the breathing area, which is ideal for airborne particles that
rise, such as smoke. It also allows for more space in the room by
keeping off of the table or other such furniture.
Mounts
easily to wall stud. This great space saver keeps the unit from being
obtrusive. Great for home or office use. Keeps your air cleaner elevated
at "breathing level". Part# 10007 |
 |
 |
The LakeAir
Wall mounting bracket is compatible with either the LA-1400 or LA-2000 air
cleaners. This accessory allows you to mount the unit above the
breathing area and off to the side, which is ideal for airborne particles
that rise, such as smoke. It also allows for more space in the room by
keeping off of the table or other such furniture.
Mounts
easily to wall stud. This great space saver keeps the unit from being
obtrusive. Ideal for behind bars or countertops, or hung above a booth.
Keeps your air cleaner elevated at "breathing level". Part#
10009 |
For more
information, follow links to:
"Determining
the Model and Quantity of Air Cleaners For Your Application"
"Determining
the Model and Quantity of Air Cleaners For Your Application"
Common
Applications of LakeAir Air Purifiers Particles and Their Sizes in
Microns
UV
Light Air Purifiers
HEPA Air Cleaners
Commercial-industrial-air-cleaners-purifiers
|
